Retiro De Equipo (Recall) de Allura Xper Allura software versions: 8.1.25;;; 8.2.25;; and 8.2.27

Según Department of Health, Therapeutic Goods Administration, este evento ( retiro de equipo (recall) ) involucró a un dispositivo médico en Australia que fue producido por Philips Electronics Australia Ltd.

¿Qué es esto?

Una corrección al equipo o acción de retiro tomada por el fabricante para abordar un problema con un dispositivo médico. Los retiros (recalls) ocurren cuando un dispositivo médico está defectuoso, cuando puede poner en riesgo la salud, o cuando simultáneamente está defectuoso y puede poner en riesgo la salud.

Más información acerca de la data acá
  • Tipo de evento
  • ID del evento
  • Clase de Riesgo del Evento
    Class II
  • Fecha de inicio del evento
  • País del evento
  • Fuente del evento
  • URL de la fuente del evento
  • Notas / Alertas
    Australian data is current through July 2018. All of the data comes from the Australian Therapeutic Goods Administration, except for the categories Manufacturer Parent Company and Product Classification.
    The Parent Company and the Product Classification were added by ICIJ.
    The parent company information is based on 2017 public records. The device classification information comes from FDA’s Product Classification by Review Panel, based on matches of recall data from the U.S. and Australia.
  • Notas adicionales en la data
  • Causa
    Philips have identified that the first time an operator selects a new procedure type during a single examination, the shutter position resets to the open position for the new procedure type. if the shutters had previously been changed during the examination, that setting is not retained after the first time the procedure type is changed during a single examination.
  • Acción
    Philips is advising this issue will be resolved in a software update, expected to be available in the second half of 2018. Philips will notify users when this software update is available. Until a software revision that corrects this issue becomes available, users should verify that the desired shutter position is set when performing the run after the first time the procedure type is changed during a single examination. This can be accomplished by first selecting a different procedure and then reselect the original procedure on the Xper Module or on the Data Monitor.


  • Modelo / Serial
    Allura Xper Allura software versions: 8.1.25;;; 8.2.25;; and 8.2.27ARTG Number: 225815(Philips Electronics Australia Ltd - X-ray system, diagnostic, fluoroscopic, angiographic, stationary, digital)
  • Manufacturer


  • Empresa matriz del fabricante (2017)
  • Source