Events

Retiro De Equipo (Recall) de V60 Respiratory Ventilator with software version 2.20

Según Department of Health, Therapeutic Goods Administration, este evento ( retiro de equipo (recall) ) involucró a un dispositivo médico en Australia que fue producido por Philips Electronics Australia Ltd.

¿Qué es esto?

Una corrección al equipo o acción de retiro tomada por el fabricante para abordar un problema con un dispositivo médico. Los retiros (recalls) ocurren cuando un dispositivo médico está defectuoso, cuando puede poner en riesgo la salud, o cuando simultáneamente está defectuoso y puede poner en riesgo la salud.

Más información acerca de la data acá
  • Tipo de evento
    Recall
  • ID del evento
    RC-2017-RN-00275-1
  • Clase de Riesgo del Evento
    Class I
  • Fecha de inicio del evento
    2017-02-27
  • País del evento
    Australia
  • Fuente del evento
    DHTGA
  • URL de la fuente del evento
    https://apps.tga.gov.au/Prod/sara/arn-detail.aspx?k=RC-2017-RN-00275-1
  • Notas / Alertas
    Australian data is current through July 2018. All of the data comes from the Australian Therapeutic Goods Administration, except for the categories Manufacturer Parent Company and Product Classification.
    The Parent Company and the Product Classification were added by ICIJ.
    The parent company information is based on 2017 public records. The device classification information comes from FDA’s Product Classification by Review Panel, based on matches of recall data from the U.S. and Australia.
  • Notas adicionales en la data
  • Causa
    Philips has identified that v60 ventilators with software version 2.20 may falsely detect that the blower motor has stalled. if this condition occurs, the software will cause the ventilator to shut down (vent inop) and display error code 100e. ventilatory support will cease. an audible high-priority alarm will sound continuously for at least 2 minutes when the v60 shuts down for any vent inop condition and is operating on battery power. if the v60 is connected to ac power (mains supply), the alarm will continue to sound until an operator intervenes. if the v60 is connected to a remote alarm system, the alarm system will be activated until action is taken by the operator.Error code 100e only exists in v60 version 2.20 software. therefore, v60’s running version 2.10 software are not subject to this particular vent inop condition.To date, there have been no adverse events reported due to false detection of blower motor stalls.
  • Acción
    Phillips is advising affected facilities to discontinue use of the V60 until V2.10 s/w is installed. If no other non-invasive ventilator is available, & other methods of ventilator support are deemed inappropriate or undesirable for the patient, facilities may continue to use the V60 under the conditions below: 1. Make arrangements to have V2.10 s/w installed on affected devices ASAP. 2. To minimise risk of illness or injury, operate the V60 as defined in the operator’s manual & promptly attend to all alarms presented by the V60. 3. As recommended, use an external O2 monitor/analyser & set the alarm thresholds appropriately. 4. As recommended, ensure the correct circuits and masks identified in the operator’s manual are used with the V60. 5. Wherever possible, connect the V60 to a remote call system. If the V60 Shuts down, alarms & displays Error Code 100E, turn the V60 off & restart the ventilator. If 100E occurs again, discontinue use of the V60 and use an alternate ventilator

Device

V60 Respiratory Ventilator with software version 2.20

Manufacturer

Philips Electronics Australia Ltd
  • Empresa matriz del fabricante (2017)
    Philips
  • Source
    DHTGA