Alerta De Seguridad para GEMSTAR INFUSION PUMP / Model: 7 THERAPIES / ANVISA Registry # 80253310025.

Según Agência Nacional de Vigilância Sanitária (ANVISA), este evento ( alerta de seguridad ) involucró a un dispositivo médico en Brazil que fue producido por Hospira Costa Rica Ltd..

¿Qué es esto?

Las alertas proporcionan información importante y recomendaciones sobre los productos. Aunque se haya emitido una alerta, esto no significa necesariamente que el producto se considera peligroso. Las alertas de seguridad, dirigidas a trabajadores de la salud y a usuarios, pueden incluir retiro de equipos. Pueden ser escritas por los fabricantes, pero también por funcionarios del área de salud.

Más información acerca de la data acá
  • Tipo de evento
    Safety alert
  • ID del evento
    1255
  • Fecha
    2013-05-06
  • País del evento
  • Fuente del evento
    ANVISA
  • URL de la fuente del evento
  • Notas / Alertas
    Brazilian data is current through June 2018. All of the data comes from Anvisa, except for the categories Manufacturer Parent Company and Product Classification.
    The Parent Company and the Product Classification were added by ICIJ.
    The parent company information is based on 2017 public records. The device classification information comes from FDA’s Product Classification by Review Panel, based on matches of data from the U.S. and Brazil.
    ICU Medical, Inc. acquired from Pfizer in early 2017, Hospira Infusion Systems, the portion of Hospira dedicated to develop infusion pumps.
  • Notas adicionales en la data
    Calibration of the proximal and distal pressure sensor may vary, resulting in failure of the pump's Proximal or Distal Occlusal Operation Test as described in the GemStar Service Technical Manual, or exhibiting one of the following errors during infusion or pump configuration : Check Cassete - D; Check Cassete - P; Proximal occlusion; Distal occlusion; Pressure Calibration Error; Damaged Pressure Sensor Event; Damaged Pressure Sensor Status; Distal Pressure Out of Limit; Proximal Sensor Off limit. A pump with this problem may, instead of reporting an error, not detect occlusions or emit false occlusion alarms, which will interrupt the infusion and cause the device to emit visual and audible alerts. If these failures are observed the infusion is interrupted, resulting in delayed / interrupted therapy. An undetected distal occlusion can cause excessive pressure and accumulation of fluid in the distal line not detected by the pressure sensor. When distal occlusion is resolved, fluid accumulation will be administered to the patient and may cause a maximum overdose of <1.0 mL. The severity of the delay or discontinuation of therapy depends on the underlying condition of the patient and the prescribed treatment. A delay / interruption in therapy may, in the worst case, result in a serious adverse event. Health professionals are advised to evaluate the risks / benefits to patients associated with the use of the equipment when administering critical therapies. Clients should contact a Hospira representative for the use of an alternative pump, particularly for patients in whom delayed / discontinued therapy or overdose can lead to serious injury or serious adverse events. It is recommended to perform proximal and distal occlusion tests as described in the Gemstar Technical Service Manual. If the pump fails one of the tests, it must be withdrawn from use. If you are unsure whether to perform the tests or if the infusion pump fails during one of the tests, contact Hospira on 0800-7733133 to report the problem and send the pump for recalibration. Performing distal and proximal occlusion tests should be included in the annual preventive maintenance schedule. Access the letter to the clients, see the link: http://portal.anvisa.gov.br/wps/wcm/connect/a59744804f8690b9b60cf79a71dcc661/FA302-02_Messagem+de+Alerta.pdf?MOD=AJPERES #### UPDATED IN 23 / 08/2017, the field action documentations sent by the company are filed in the area. If necessary, the area can reassess the action at any time.
  • Causa
    Calibration of the proximal and distal pressure sensor may vary, resulting in failure of the proximal or distal occlusal operation test of the pump.
  • Acción
    Sending the letters to the clients (hospitals and distributors) and updating the Technical Service Manual indicating the performance of the distal and proximal occlusion tests in annual preventive maintenance.

Manufacturer

  • Empresa matriz del fabricante (2017)
  • Source
    ANVSANVISA