Events

Retiro De Equipo (Recall) de Device Recall Ziehm Imaging GmbH

Según U.S. Food and Drug Administration, este evento ( retiro de equipo (recall) ) involucró a un dispositivo médico en United States que fue producido por Ziehm Imaging Inc.

¿Qué es esto?

Una corrección al equipo o acción de retiro tomada por el fabricante para abordar un problema con un dispositivo médico. Los retiros (recalls) ocurren cuando un dispositivo médico está defectuoso, cuando puede poner en riesgo la salud, o cuando simultáneamente está defectuoso y puede poner en riesgo la salud.

Más información acerca de la data acá
  • Tipo de evento
    Recall
  • ID del evento
    66976
  • Clase de Riesgo del Evento
    Class 2
  • Número del evento
    Z-0565-2014
  • Fecha de inicio del evento
    2013-11-21
  • Fecha de publicación del evento
    2013-12-24
  • Estado del evento
    Terminated
  • País del evento
    United States
  • Fecha de finalización del evento
    2014-06-23
  • Fuente del evento
    USFDA
  • URL de la fuente del evento
    https://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfres/res.cfm?id=124375
  • Notas / Alertas
    U.S. data is current through June 2018. All of the data comes from the U.S. Food and Drug Administration, except for the category Manufacturer Parent Company.
    The Parent Company was added by ICIJ.
    The parent company information is based on 2017 public records.
  • Notas adicionales en la data
    Interventional fluoroscopic x-ray system - Product Code OWB
  • Causa
    Engineering change in 2006 resulted in a minor non-conformity of their devices. specifically the emergency switch was changed from a standard component to just an option on the devices.
  • Acción
    Ziehm Imaging sent an "URGENT RECALL NOTICE" letter dated November 22, 2013, to all affected customers. The letter identified the products the problem and the action needed to be taken by the customers. Customers were advised and instructed to: Your Model and Serial number can be found on the product label attached to the side of the mobile C-arm Stand. Our records indicate that your facility has one or more of the products listed above that are being used in your facility. Recall of the product was initiated because according to our manufacturing documentation, the referenced device installed at your facility was not equipped with an emergency stopping device for vertical travel of the c-arm imaging assembly. To fully comply with applicable standards the referenced device must be retrofitted with an emergency stopping device identification and label. The issue: According to our manufacturing documentation, the referenced device installed at your facility was not equipped with an emergency stopping device. To fully comply with applicable standards the referenced device must be retrofitted with an emergency stopping device. The manufacturer Ziehm Imaging GmbH advised customers they may continue to operate the affected device with caution until the correction has been carried out on-site. During this time Ziehm Imaging GmbH advises the operator to be aware of the following safety measures which may resolve the possibility of potentially hazardous situations by: " Operating the power-off switch located either on the C-arm Stand top panel or on the monitor cart " Removing the power cable from the wall outlet or, " Activate the push-buttons for reverse vertical movement and keeping the pushbutton pressed until patient /operator is no longer in the risk zone or the device stops Please alert all staff members working with the device to these potential hazardous situations, and familiarize them with all possibilities to resolve the hazardous situation

Device

Device Recall Ziehm Imaging GmbH
  • Modelo / Serial
    9760 9937 90067 90816 9763 9945 90102 90817 9828 9946 90103 90819 9840 9983 90142 90823 9841 9985 90636 90838 9848 9986 90699 90842 9849 90024 90715 90863 9855 90031 90750 90864 9856 90032 90758 90865 9894 90033 90773 90899 9896 90034 90774 90909 9923 90054 90813 90919 9924 90065 90814 9936 90066 90815
  • Clasificación del producto
    Radiology Devices
  • Clase de dispositivo
    2
  • ¿Implante?
    No
  • Distribución
    USA (Nationwide) Distribution including the states of AK, AL, AZ, CA, CO, CT, DE, FL, GA, IA, ID, IL, IN, KS, KY, LA, MT, MA, MD, MI, MN, MN, MO,MS, NC ND, NE, NH, NJ, NM, NV, NY, OH, OK, OR, PA, RI, SC, SD, TN, TX, UT, VA, VT, WA, WI, WV, WY and Hawaii.
  • Descripción del producto
    Ziehm Vision(2) C-Arm Interventional Fluoroscopic X-Ray System. || Mobile Fluoroscopic Imaging
  • Manufacturer
    Ziehm Imaging Inc

Manufacturer

Ziehm Imaging Inc
  • Dirección del fabricante
    Ziehm Imaging Inc, 6280 Hazeltine National Dr, Suite 100, Orlando FL 32822-5114
  • Empresa matriz del fabricante (2017)
    Aton 2 Gmbh
  • Source
    USFDA